Pure Sine Wave Inverter 12V DC 600W RCD OEINVPAR6
Safety advice
Tested and certified to the relevant EMC and LVD Directives.
Tested and certified to the relevant EMC and LVD Directives.
Legal advice
CE Approved
CE Approved
Pure Sine Wave Inverter 12V DC 600W RCD OEINVPAR6
12V compatibility producing 230V AC Pure Sine Wave with 600W of power
Will work with all 12V vehicles to produce 230V mains power with 600W of power for all electronic devices including sensitive devices, for remote working1. 1200W peak power rating.2. RCD Protected
1. To handle large power loads when initially starting an electrical device. Will drop back down to 600W continuous supply.2. The integral Residual Current Device (RCD) replaces the need for an external RCD and will switch off the inverter in the event a fault is detected between live and earth. This protects the user against electric shocks.2.1A USB Charging port
To charge mobile phones or smaller electronic devices at the same time as using the main power supply from the inverter.Low battery alarm at 10V and low battery shutdown at 9.5V
Low battery alarm to alert operators to the fact that their vehicle battery is being drained and should stop using the inverter. When a vehicle’s battery drops below 9.5V the inverter will switch off to preserve the vehicle battery to allow the vehicle to restart.Technical Data
Product information
Number Of Phases
Single
Electrical Data
Input voltage range
(12V NOM) 9.5 V - 16.5 V
Input Current
59 A
Output voltage
200 - 240 Vrms
Continuous Power Rating (up to 12 hours)
600 W
Peak Amps
118
No Load Current
< 1.5 A
Peak Power Rating (up to 200ms)
2 * rated power for 0.2s
Physical Attributes & Dimensions
Height
90.0 mm
Dimensions & weight
Input Cable Gauge / Length
600mm, 14mm^2
Lifetime Data
Guarantee
2 years
Additional product data
Battery Connection
Terminal Nut & Bolt
Operating Temperature
-25 +45 °C
Efficient at 75% load
90 %
Low Battery Alarm
Yes
Low Battery Shutdown
Yes
Outpur Waveform
Pure Sine
Output Frequency
50 or 60 Hz
Power Saving Mode
Yes
Power Saving Mode Current
< 0.2 A
Programmable features
Thermal Protection
Yes
Certificates & standards
Standards
CE / E- Mark
Environmental & Regulatory Information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Primary article identifier
4052899631045
Candidate list substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe use instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration no. in SCIP database
9b1254d7-0516-44c3-b467-54ae5d91b019
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
|---|---|---|---|---|---|
| 4052899631045 |
FS
| 1 | 460mm x 203mm x 142mm | 3055.00g | 13.26dm³ |
| 4062172322188 |
VS
| 1 | 476mm x 227mm x 166mm | 3445.00g | 17.94dm³ |